Optimal working height
Paint oil and hazardous fluids
Low noise, low energy, durable
Compact cans, drums & tins up to 30L
The Mil-tek 2101S Stainless Steel Can Crusher is a small footprint can compactor from Mil-tek. It is capable of crushing and compacting tins, cans and drums up to 30 liters in size. Compacting cans in a Can Crusher reduces their volume by up to 90%, making them much easier to store and easier to recycle.The stainless steel design makes it significantly more durable than other can presses, and makes it suitable for almost any form of metal, non-aerosol containers. Additionally, the stainless steel is easier to clean and easier to maintain.With a footprint of less than .27m2, the 2101S Can Crusher is perfectly suited to working in locations and workplaces where space is limited. It can be seamlessly installed without intruding upon the existing setup. The 2101S is available with or without stainless steel legs, allowing users to install it in a convenient location and operate it at a normal working height. The legs can also be securely bolted to the floor for optimum safety.The Mil-tek 2101S Stainless Steel Can Crusher features enhanced safety features including fail-safes, a cycle counter and a patented new door locking mechanism.Requiring nothing more than compressed air to run, the 2101S Stainless Steel Can Crusher is low-energy, small-size and incredibly safe machine to use.
The University of Mary Washington is a liberal arts and sciences university in Virginia. They partner with Sodexo to manage their waste. Sodexo opted for a Can Crusher to facilitate easy compaction and transportation food cans.
Hörby Paint Shop is an auto paint shop and bodywork shop in Sweden. The 101 Can Crusher reduces the cost of refuse and eliminates the need to rent a container.
Rosenlunds Vårdcentral is a hospital in central Stockholm. They use a can press in order to hygienically reduce the volume of waste produced.
Installation is as simple as providing the 2101S Can Crusher with compressed air. Depending on requirements, the machine can be supplied with or without legs.
Place an empty tin or canister upright into the can press. The machine can crush containers up to 30 litres in size.
To activate the can press, firmly close the door and pull down the activation handle. This activates the pressing cycle, which takes around 7-10 seconds.
Anything up to 30 litres in volume: Cans, drums and tins, anything except pressurised/aerosol cans.
As the 2101S Can Crusher is stainless steel, it is not necessary to clean out cans before they are compacted. However, in order to maximise the life span of the machine, it is advised that you rinse cans in cold water before compacting them. This will in turn reduce the need to clean the machine.
The 2101S Can Compactor is powered exclusively by compressed air, making it ideal for the shipping and offshore industry. This also means that it is free of hydraulic oil, electrical components, or any other inbuilt fire hazard. Patented ECODrive technology ensures that the can crusher only uses the required amount of energy with each cycle.
Up to 90% for most cans, tins and drums. This makes storing waste significantly easier, and also facilitates aluminium recycling for correctly managed waste that is brought ashore.
The hygienic, environmentally friendly 2101S Stainless Steel Can Crusher is ideal for industrial kitchens. The stainless steel structure is rust free and easy to clean, and can easily handle the temperature and conditions in a busy kitchen.
The 2101S Can Crusher can be used to compact the wide range of tins and cans used in food production in a busy industrial kitchen. It is powered exclusively by compressed air, so is free from hydraulic oil and other potential contaminants.
Automotive workshops and manufacturing plants use large volumes of cans, tins and drums whilst working on vehicles.
The Miltek Stainless Steel Can Crusher is ideal for use in this industry, as it can easily compact and crush these cans. Furthermore, the machine is small, can be installed with or without legs, and can seamlessly fit into the workplace. This further facilitates better waste management and recycling, and reduces the disruption caused by carrying waste out to bins.
In environments where hygiene is crucial, the Miltek 2101S is ideal .Containing no electrical parts and risk of contamination, the 2101S is stainless steel and powered exclusively by compressed air. It can therefore be installed in kitchens or hygienic areas without interfering with the hygiene or environmental policies.
Whether it be in a food preparation areas or in storage areas, the stainless steel can press is an ideal addition to handle the range of cans, drums and tins that are used and disposed of in healthcare facilities.
|Capacity||Cans: <30 L.|
|Degree of Compression||85-90%|
|Noise level||<70 dB (A)|
|Pressure||2250 kg at 8 bar|
Drop us a line and we will get back to you within 24 hours.